Shoei Cheek Pads for RF-SR Helmets
- Riders will sometimes need to change the cheek pads that come installed in their helmets. Some people need a little more or less space, while others simply need to install a fresh set of pads for better comfort (and smell).
- The pads both come out and can be installed quite easily. Simply slide the pad into the shell and snap the closures into place.
- Use the chart below to figure out what size cheek pad you currently have based on your helmet size, and then pick a replacement set based on your need.
Here is a link to Shoei’s website where you can download helmet manuals by model. You’ll find information on installing and removing shields, base plates, cheek pads, chin curtains, etc.
Please Note: We can ship Shoei products to addresses in the 50 US states only (per manufacturer’s restrictions).
Use the table below to determine what size cheek pads came standard with your helmet:
|Helmet Size||Cheek Pad Size||Optional Pads|
|XS||39mm||31, 35 or 43|
|Small||35mm||31, 39 or 43|
|Medium||35mm||31, 39 or 43|
|Large||35mm||31, 39 or 43|
|XL||35mm||31, 39 or 43|
|XXL||31mm||35, 39 or 43|
Changing cheek pads to change the helmet fit: All sizes of cheek pads are interchangeable in all helmet sizes. To get MORE room in your helmet, you need to buy a SMALLER cheek pad. To get a TIGHTER fit, you need to buy a LARGER cheek pad. Example: If you have a size Large RF-SR helmet, you have cheek pads that measure 35mm. If the helmet is too tight on you, a 31mm pad would give you more room. If it’s too loose, a 39mm pad would snug up the fit.